PDA

View Full Version : Mounting a Dayton blower and Elf filter in a HydroHut Mini



David G.
12-29-2006, 03:05 PM
There is no perfect way to mount a Dayton blower in a HydroHut, but here are some instructions that will make things a bit easier.

Unlike centrifugal blowers, the Dayton must hang so that it straddles the rods/brackets and the fan's butt sits into the straps.

Then (referring to the picture for strap placement), the straps would come over the blower and be tightened.

Because of the way the Dayton needs to sit, a short piece of flex ducting should be used to attach the Dayton to the flange in the ceiling.

http://www.bghydro.com/mmbgh/others/strap-placement.jpg