PDA

View Full Version : ventilation



lovin it
01-08-2007, 09:06 AM
Im thinking of buying the Vortex 6" Centrifugal Fan 449 cfm (even though the hood has a hole lay out for a 4")and wondering about the set-up.I have a stainless steel reflector hood,(cooltouchlighting.com) 13x24 outside measurements and will add tempered glass. Can I run the duct work from the hood to the fan motor on the floor and then from the fan motor to the outside?

need advice

dhill
01-09-2007, 05:04 PM
Yes you can, however, you will need a 4" x 6" reducer (http://www.bghydro.com/BGH/Itemdesc.asp?ic=AFAR064&eq=&Tp=). Place the reducer on the hood if you can and use 6" ducting (http://www.bghydro.com/BGH/Itemdesc.asp?ic=AFADA06X25&eq=&Tp=) from the reducer to the fan and then from the fan outside.

If you find that the fan is to loud then you can also place it onto a speed control (http://www.bghydro.com/BGH/Itemdesc.asp?ic=AFAGS) to slow the fan speed down.