|
|
|
#1
|
|||
|
|||
|
"Dimensions:
Assembled: 2'7" wide x 4'11" deep x 6'7" tall / 31.5" x 31.5" x 70.8" tall / 80 x 150 x 180cm" All of these are inconsistent with each other. Can anyone help me out and give me some real dimensions on this tent? |
|
#2
|
|||
|
|||
|
also is 2 400 watters too much for this tent
|
|
#3
|
|||
|
|||
|
2x 400s or 2x 600s are good... you still want a good exhaust fan though
it looks like they had one of the 31.5" measurements wrong... the tent measures: 2'7" wide x 4'11" deep x 6'7" tall -or- 80 x 150 x 180cm |
|
#4
|
|||
|
|||
|
180 cm = 70.86 in = 5'10 in., i assume youre right that it is indeed 6'7", but you know, Id like to be sure how tall it is as my ceilings are 6'9". Thanks for the info and ill definitely be stocking it with 2 400's and a 6 in vortex
|
|
#5
|
|||
|
|||
|
Should be 80 x 150 x 200cm
|
|
#6
|
||||
|
||||
|
FnB,
Thanks for bringing this to our attention. We have updated our website to reflect the correct dimensions for the GL80L (2'7" wide x 4'11" deep x 6'7" tall) Sorry for any confusion! Henry |
|
#7
|
|||
|
|||
|
would there be enough room for a four foot light trac in a gl80l . enough room for ducting for a 6" air cooled hood
|
|
#8
|
||||
|
||||
|
Yes to both, but it would depend on how big your reflector is and you would probably need to experiment with the orientation to see which way would work best with the ducting. I think it would definitely work in only one side of the reflector had ducting; it both sides have ducting, you would definitely need to take some measurements...
|
![]() |
| Tags |
| None |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
|
|